Basics & practice

Where to buy mosaic materials: a guide for every region

Where to buy mosaic supplies near you: smalti, glass tile, stone, nippers, adhesive and grout, what to look for, good substitutes and course shopping lists.

  • 23 min read
Cut smalti sorted by color in clear containers
Pre-cut smalti sorted by color before setting. Most suppliers sell it in mixes or single colors.

This guide shows where to buy mosaic supplies wherever you live, and what to look for when you get there. Our courses were filmed in our Moscow studio with materials we make and sell in Russia and the CIS only. We don't ship them abroad, so you'll buy equivalents locally or online. Almost everything is sold at hardware, tile and art-supply stores; smalti is the one item you'll usually order from a specialist mosaic supplier.

The short version

  • Match by spec, not by brand. The lessons were filmed in Russia, so some brands on screen are Russian. What matters is the material, size, thickness and type of adhesive.
  • Easy to find anywhere: glass tile, stone mosaic tile, cement-based tile adhesive, epoxy grout, nippers, mesh, MDF.
  • Order early: smalti and pre-cut stone. Delivery across borders takes two weeks to a month.
  • Buy a color chart first if your smalti supplier sells one, and buy each color from one batch, with extra.
  • Course shopping lists are at the end of this page.

How to use this guide

  1. Find your course in the shopping lists. Each list links to the lesson with the full list and quantities.
  2. For each item, read its section below: what it is, what to look for, and what can replace it.
  3. Search with the generic name in bold. The Find it on links open a search on the big online marketplaces.
  4. Check where to look by region for the store types and chains near you.

For a first, non-course project, start with our guide to mosaic tools and supplies for beginners.

Mosaic materials

Smalti

What it is. Thick, opaque colored glass made for mosaic, sold as plates (cakes) or already cut into tesserae. It is the main material of the Smalti, Animal and Impressionism courses.

What to look for.

  • Pre-cut tesserae save hours of cutting. Our courses use pieces of about 1 cm (3/8 in) on the face; each course list gives the exact size.
  • A color chart. Colors on a screen never match the real glass. Many suppliers sell numbered sample charts, which also make reordering easy.
  • Italian smalti (for example Orsoni, made in Venice) is the best known and the most expensive. Chinese smalti is cheaper and easy to order online.

Substitutes. Smalti plates cut with a hammer and hardie. For bright accents, thick vitreous glass tile.

Find it on: Amazon · AliExpress · eBay

Vitreous glass tile

What it is. Pressed glass mosaic tile, usually 20 × 20 mm (3/4 in) or 25 × 25 mm (1 in), about 4 mm (5/32 in) thick, with a slightly textured back.

What to look for. Vitreous tile, loose or on paper sheets: paper soaks off in warm water, mesh has to be cut or peeled. Craft packs come in mixed colors; tile stores sell sheets of one color.

Substitutes. Thin "crystal" or pool tile cuts badly with nippers; avoid it for the courses. Gold-effect glass tile can stand in for gold smalti.

Find it on: Amazon · AliExpress · eBay

Stained glass

What it is. Sheet art glass, about 3–4 mm (1/8–5/32 in) thick, used in Basics (Project 3) and one Impressionism sample.

What to look for. Opaque or semi-opaque glass is easier for mosaic than clear. You need a glass cutter and breaking or running pliers for sheets.

Substitutes. Stained glass already cut into small squares.

Find it on: Amazon · AliExpress · eBay

Natural stone and marble

What it is. Marble, travertine and other stone, cut into small cubes (tesserae). The Roman course uses about 10 × 10 × 7 mm (3/8 × 3/8 × 1/4 in) pieces.

What to look for.

  • Pre-cut, hand-split marble tesserae from a mosaic supplier, color-matched to your design.
  • Or stone mosaic tile on mesh, about 2 × 2 cm (3/4 × 3/4 in), from a tile store, split in half with stone nippers. Tile stores have fewer colors.
  • Polished and tumbled faces both work; the cut face shows a truer color.

Substitutes. Smalti in matching shades for the colors you can't find. Avoid porous stone (travertine) outdoors in frost.

Find it on: Amazon · AliExpress · eBay

Ceramic and porcelain tile

What it is. Glazed ceramic tile, unglazed porcelain and broken china. None of our courses needs it, but it is the cheapest material for practice and garden pieces.

What to look for. Ceramic cuts easily with carbide tile nippers; porcelain is much harder. Unglazed porcelain mosaic on sheets keeps its color right through.

Substitutes. Old tiles and plates. See broken china mosaic.

Find it on: Amazon · AliExpress · eBay

Cutting tools

Wheeled nippers

What they are. Nippers with two hard round wheels. The main tool for glass tile, stained glass and smalti.

What to look for. Tungsten-carbide wheels that meet squarely, a spring, and wheels you can rotate or replace. For thick smalti, choose a heavy, strong pair: cheap wheels chip quickly on smalti. Montolit (Italy) and Goldblatt (US) are shown in the lessons; QEP glass tile nippers are sold in many hardware stores.

Substitutes. A basic spring pair is fine to start with. One sturdy pair is enough for every course.

Find it on: Amazon · AliExpress · eBay

Nippers for stone

What they are. Nippers with flat jaws tipped with tungsten carbide. They split marble and other stone, and cut ceramic.

What to look for. Carbide tips on both jaws, jaws that close exactly, a firm spring.

Substitutes. Carbide-tipped ceramic tile nippers from a hardware store.

Find it on: Amazon · AliExpress · eBay

Hammer and hardie

What they are. A mosaic hammer with carbide edges and a hardie, a chisel-like blade set in a heavy wooden block. Used to split stone strips and smalti plates.

What to look for. Carbide edges on both, and a heavy, stable base. Mostly sold by mosaic suppliers.

Substitutes. You don't need them if you buy pre-cut smalti and stone. More in how to cut smalti.

Find it on: Amazon · AliExpress · eBay

Adhesives

Which glue to use for which base is covered in the best glue for mosaics. Here is what to buy.

Cement-based tile adhesive (thinset) with a latex additive

What it is. The setting bed for the direct method (Roman, Impressionism, Basics Project 1) and the back fill for the indirect method (Smalti, option 1).

What to look for.

  • Polymer-modified adhesive, class C2 under EN 12004 / ISO 13007, or ANSI A118.4 or A118.15 in North America.
  • White for glass and light stone; gray for smalti and dark backgrounds.
  • The courses use Mapei Kerabond T mixed with Mapei Isolastic latex additive. In the US and Canada, Mapei sells the pair as Kerabond T with Keralastic.
  • Mix it with the additive (or half additive, half water), not water alone: it dries weaker and may crack. Our tile adhesive calculator gives the ratios.

Substitutes. Any white thinset for glass tile that already contains a polymer and is mixed with water.

Find it on: Amazon · AliExpress · eBay

Epoxy grout as an adhesive

What it is. Two-part epoxy grout, used in the Animal and Smalti courses both to bond the back of the mosaic and to grout the face.

What to look for. Translucent ("crystal", "chameleon") or light gray. Litokol Starlike Crystal, Mapei Kerapoxy and Laticrete SpectraLock Pro (Translucent) are sold in many countries. The lessons show Diamant, a Russian brand. You also need a kitchen scale accurate to 1 g (0.04 oz) to weigh the two parts; see the epoxy grout calculator.

Substitutes. Cement-based adhesive with a latex additive for the back (Smalti, option 1).

Find it on: Amazon · AliExpress · eBay

Construction adhesive and silicone

What it is. Clear mounting adhesive in a tube or cartridge, often sold as "liquid nails". Used to glue finished pieces into frames (Basics), onto the final base (Smalti) and for the indirect sample (Impressionism).

What to look for. Clear, strong, for indoor use, and water-resistant. The videos show Tytan Classic Fix; Loctite and Liquid Nails make similar clear construction adhesives.

Substitutes. Two-part epoxy adhesive (stronger, costs more).

Find it on: Amazon · AliExpress · eBay

PVA glue

What it is. White wood glue. It dries clear and is fine for small, light indoor pieces on wood.

What to look for. It softens in water, so keep it away from anything that gets wet, outdoor pieces and cement-based grout. None of our courses uses it.

Find it on: Amazon · AliExpress · eBay

Grout

What it is. The filler between tesserae. Cement-based grout is the usual choice for a first mosaic; epoxy is for wet places, outdoors and the courses that use it as the adhesive too.

What to look for. Unsanded cement grout for joints up to about 3 mm (1/8 in). For epoxy, see above. Pick a shade a little lighter than the darkest color in your work; gray is the safest.

Substitutes. Many smalti and stone panels for indoors are left ungrouted. See how to grout a mosaic and cement vs epoxy grout.

Find it on: Amazon · AliExpress · eBay

Bases and mesh

MDF and plywood

What it is. The working board and the final base for most course pieces.

What to look for. MDF about 10 mm (3/8 in) thick for 55 × 55 cm (22 × 22 in) panels; 6 mm (1/4 in) is enough for the Impressionism piece. Plywood for the small Basics projects. Many hardware stores cut board to size.

Substitutes. Any rigid board; OSB only as a working board.

Find it on: Amazon · AliExpress · eBay

Cement board

What it is. A board of cement and glass fiber, sold for tiling bathrooms. Not used in the courses, but the right base for mosaics that will be outdoors or wet.

What to look for. 6–12 mm (1/4–1/2 in) thick; cut it with a utility knife and snap. See what can you mosaic on.

Find it on: Amazon · AliExpress · eBay

Fiberglass mesh

What it is. A grid you set tesserae on (Roman, Impressionism) or press into the back to reinforce it (Smalti, Animal, Basics).

What to look for. Alkali-resistant fiberglass, because cement is alkaline; a fine grid (the Basics course uses 2 × 2 mm, 1/16 in). White is best under translucent glass. Sold as mosaic mesh or plaster (render) mesh.

Substitutes. Overlapping strips of self-adhesive drywall tape.

Find it on: Amazon · AliExpress · eBay

Small tools and helpers

  • Tweezers with hard steel, straight, fine tips. Soft tips bend on smalti. Find it on: Amazon · AliExpress · eBay
  • Palette knife with a flexible steel blade, for mixing and spreading adhesive. Find it on: Amazon · AliExpress · eBay
  • Rubber grout float, small, about 40 mm (1 1/2 in), for epoxy and grout. Find it on: Amazon · AliExpress · eBay
  • Clear self-adhesive mosaic film for the indirect and double indirect methods (Basics, Animal). Clear vinyl from sign suppliers also works. Find it on: Amazon · AliExpress · eBay
  • Fine dry quartz sand (kiln-dried) for the joints before the back is poured. Baking soda works too. Find it on: Amazon · AliExpress · eBay
  • Unflavored food gelatin for the Smalti course, from any grocery store.
  • Printed cartoon at exact size from a copy or print shop; mirrored for the indirect method.
  • Staple gun, masking tape, utility knife, kitchen scale, disposable cups and gloves. Find it on: Amazon · AliExpress · eBay

Stained glass (Tiffany technique)

These are the supplies for Stained Glass Basics: a Tiffany Pendant, where you cut glass, wrap each piece in copper foil and solder the pieces together. Almost everything is sold by stained glass suppliers (search for stained glass supplies plus your country), and much of it by craft stores and online marketplaces. Soldering irons, solder and wire are also at hardware and electronics stores.

Glass sheets

What it is. Colored sheet glass for stained glass, smooth or textured on one side. The course uses red and green textured glass about 4 mm (5/32 in) thick and clear window glass for the background.

What to look for. 3–4 mm (1/8–5/32 in) thick; small sheets give you more colors for the same money. Textured glass plays with light more but is cut on its smooth side. Glass from China is usually the cheapest and is fine for first pieces; American and European art glass costs more.

Substitutes. Ordinary clear window glass for backgrounds: it cuts very easily.

Find it on: Amazon · AliExpress · eBay

Glass cutter and cutting oil

What it is. A cutter with a small hardened wheel that scores the glass, and a light oil that lubricates the wheel.

What to look for. An oil-fed (self-oiling) cutter with a replaceable head; pencil and pistol grips work the same, so choose the handle that suits your hand. A metal ball on the end of the handle is handy for tapping the score. Glass cutting oil is sold by stained glass suppliers; kerosene also works but is flammable, so keep it away from the soldering iron.

Substitutes. A cheap fixed-head cutter is fine to start with; replace it when the wheel goes dull.

Find it on: Amazon · AliExpress · eBay

Breaking and grozing pliers

What they are. Breaking pliers have one straight jaw and one curved jaw: the straight jaw goes on top, the curved one under the score, and the glass snaps along the line. Running pliers do the same job with curved jaws from above. Grozing pliers nibble off small leftovers.

What to look for. Pliers made for stained glass, not hardware-store pliers. Skip combined cutter-and-pliers tools: they score roughly and the glass crumbles.

Find it on: Amazon · AliExpress · eBay

Glass grinder

What it is. A small electric grinder with a diamond bit that turns in a water bath. It smooths sharp edges and shapes each piece so the foil sticks and the pieces fit.

What to look for. A face shield over the bit (otherwise wear safety glasses every time), a coarse and a fine bit, and a work surface large enough for your pieces. It is the largest purchase for the course.

Substitutes. A diamond hand pad or file for a first piece: slower and rougher, but it works.

Find it on: Amazon · AliExpress · eBay

Copper foil tape

What it is. Thin copper tape with adhesive on one side. It wraps the edge of every piece, and the solder sticks to it.

What to look for. Match the width to the glass: 4.76 mm (3/16 in) or 5.16 mm (13/64 in) for 4 mm (5/32 in) glass; narrower for thinner glass, wider for thicker. Backing comes in copper, black and silver: under clear glass the backing color shows through the edge, so use black-backed foil if you'll patina the seams black.

Find it on: Amazon · AliExpress · eBay

Flux and solder

What they are. Flux cleans the oxide off the copper foil so solder can bond to it. Solder is the metal that forms the seams.

What to look for.

  • Flux made for stained glass, liquid or gel. Soldering acid (zinc chloride flux) also works but is harsher.
  • Solder as solid wire, without a rosin core, 2–3 mm (1/16–1/8 in) thick. 60/40 (60% tin, 40% lead) is the usual choice for copper foil; 63/37 also works.
  • Lead-free stained glass solders exist. They melt at a higher temperature and are harder to build into a neat seam, but they contain no lead, which some people prefer.
Find it on: Amazon · AliExpress · eBay

Soldering iron

What it is. The tool that melts the solder along the seams.

What to look for. About 80–100 W, a plated (non-stick) tip, a stand, and ideally temperature control. Check that replaceable tips are sold for it: a fine tip helps with small work and the beaded edge. Add a tip-cleaning sponge or brass wool.

Find it on: Amazon · AliExpress · eBay

Patina, wire and small items

  • Patina, black or copper, changes the color of the solder seams. It is optional; you also need a small brush and fine steel wool for polishing. Find it on: Amazon · AliExpress · eBay
  • Thin wire for the hanging loops (copper or tinned wire works), small round- or flat-nose pliers and wire cutters. Jump rings are a ready-made alternative. Find it on: Amazon · AliExpress · eBay
  • A cord 1–2 mm (1/32–1/16 in) thick or a chain to hang the finished piece.
  • Permanent markers, black and white, paper and a felt-tip pen for the pattern.
  • Safety glasses, gloves, a brush and dustpan. An extractor fan or a window fan for soldering; a respirator if you solder often.

Safety for stained glass

Lead and fumes. Lead solder and heated flux give off toxic fumes. Solder in a ventilated room nobody lives in, at an open window or with an extractor fan, don't eat or drink at the work table, and wash your hands after work. If you're pregnant, or children or pets are in the room, don't solder.

Glass. Wear safety glasses when you cut and grind, and gloves when you handle raw edges. Never brush chips off with your hand: use a brush and dustpan.

Chemicals. Flux and patina are chemicals, and some patinas contain toxic compounds. Wear gloves, keep them away from food and children, and follow the label.

Shopping lists by course

The full list with quantities is in each course's materials lesson. These short lists show what to buy and where it's hardest to find.

The Basics of Mosaic

The Basics of Mosaic: three small projects. Full list in the last lesson, Materials and tools for the course.

  • Natural stone, 2 kg (4.4 lb), ideally pre-cut: the hardest item. Marble mosaic tile split in half works.
  • Vitreous glass tile, 2 kg (4.4 lb), and stained glass, 2 kg (4.4 lb), mixed colors.
  • Cement-based adhesive, 1 kg (2.2 lb), with latex additive, 300 ml (10 fl oz).
  • Epoxy grout, 1 kg (2.2 lb), translucent or light gray; clear mounting adhesive, one tube.
  • Plywood bases, fiberglass mesh and clear mosaic film, 1 m² (10.8 sq ft) each; frames with hardboard backs.
  • Nippers for stone, wheeled nippers, glass cutter, breaking pliers, tweezers, palette knife.

How to Draw a Mosaic Cartoon

How to Draw a Mosaic Cartoon: everything is sold at art-supply stores. Full list in Part 2 (lesson 4).

  • A board of plywood or MDF, at least 55 × 55 cm (22 × 22 in), and a staple gun.
  • White drawing paper, or kraft or pastel paper that is already toned.
  • Coffee, tea or thinned paint and a sponge to tone the paper.
  • Flat synthetic brushes 10 mm (3/8 in) wide, plus small round ones; acrylic, tempera or gouache.
  • A graphics tablet is optional.

Smalti Mosaic

Smalti Mosaic: a 55 × 55 cm (22 × 22 in) panel by the indirect method. Full list in the last lesson.

  • Pre-cut smalti, 7 kg (15.4 lb): order it first, from a mosaic supplier.
  • Strong wheeled nippers: the only specialized tool.
  • Gelatin, quartz sand, MDF, mesh, a mirrored print of the cartoon.
  • For the back: cement-based adhesive with latex additive, or 2.5 kg (5.5 lb) of translucent epoxy grout.

Roman Mosaic

Roman Mosaic: a 55 × 55 cm (22 × 22 in) stone panel by the direct method. Full list in the last lesson.

  • Natural stone, about 7 kg (15.4 lb), pre-cut into 10 mm (3/8 in) tesserae: order it from a mosaic supplier, or split stone mosaic tile.
  • Nippers for stone; a hammer and hardie only if you split the stone yourself.
  • Cement-based adhesive, 2.5 kg (5.5 lb), white and gray, with latex additive, 500 ml (17 fl oz).
  • MDF, mesh, the printed cartoon (not mirrored).

Realistic Animal Mosaic

Realistic Animal Mosaic: a cat and a mouse by the indirect and double indirect methods. Full list in Lesson 3.

  • Pre-cut smalti, about 1 × 2 cm (3/8 × 3/4 in), 1 cm (3/8 in) thick: from a mosaic supplier.
  • A few colors of vitreous glass tile, 20–25 mm (3/4–1 in).
  • Two-part epoxy grout, about 1.3 kg (2.9 lb), clear or neutral: it is the adhesive and the grout.
  • Clear mosaic film, mesh, quartz sand, rigid boards, a kitchen scale.

Impressionism in Mosaic

Impressionism in Mosaic: a 30 × 40 cm (12 × 16 in) smalti piece after a painting. Full list in Lesson 3, How to buy materials and tools.

  • Smalti in your palette's colors, about 6–7 mm (1/4 in) thick: buy the supplier's color chart first.
  • Vitreous glass tile for accents; a little stained glass and marble for the samples.
  • Cement-based adhesive, gray and white, with latex additive.
  • MDF 6 mm (1/4 in), mesh, clear plastic wrap, masking tape, a staple gun.
  • Wood strips and paint for the frame.

Stained Glass Basics: a Tiffany Pendant

Stained Glass Basics: a Tiffany Pendant: a poppy suncatcher in the Tiffany technique. Full list in Lesson 2, Materials, tools and the first cut; what to look for is in Stained glass (Tiffany technique) above.

  • Red and green textured stained glass, about 4 mm (5/32 in) thick, and clear window glass: from a stained glass supplier.
  • An oil-fed glass cutter, cutting oil, breaking and grozing pliers.
  • A glass grinder: the largest purchase; a diamond hand pad will do for a first piece.
  • Copper foil 4.76 or 5.16 mm (3/16 or 13/64 in), flux, 60/40 or lead-free solder, a 100 W soldering iron with a stand.
  • Patina (optional), thin wire for the loops, a cord or chain.

Where to look by region

The same six kinds of stores exist almost everywhere:

  • Mosaic suppliers, mostly online: smalti, pre-cut stone, vitreous tile, good nippers, hammer and hardie, mosaic film. Search for mosaic supplies plus your country; many ship internationally.
  • Hardware and home improvement stores: nippers, mesh, MDF cut to size, tile adhesive, grout, construction adhesive, staple guns.
  • Tile stores: glass and stone mosaic tile on sheets, adhesive and epoxy grout from Mapei, Litokol or Laticrete. Colors are limited.
  • Art and craft stores: tweezers, palette knives, brushes, paper, craft glass tile, sometimes stained glass.
  • Stained glass suppliers, online and in many cities: glass sheets, cutters, pliers, grinders, copper foil, flux, solder and patina.
  • Online marketplaces: almost everything on the lists.

The chains below are examples we checked, not recommendations, and we have no affiliate links. Stock differs from store to store, so check the website before you go.

Europe

  • Home improvement: Leroy Merlin (France, Spain, Italy, Portugal, Poland and others), OBI, Bauhaus, Hornbach (Germany, Austria, the Netherlands, the Czech Republic and others).
  • Art supply: Boesner and Gerstaecker in Germany; independent art shops elsewhere.
  • Smalti: Italy is the home of Venetian smalti; Orsoni works in Venice.
  • Online: your national Amazon, eBay, AliExpress.

United Kingdom

  • Home improvement: B&Q, Wickes (glass mosaic sheets), Screwfix (tile nippers).
  • Craft: Hobbycraft (mosaic tile packs, nippers).
  • Online: Amazon.co.uk, eBay.

United States and Canada

  • Home improvement: The Home Depot, Lowe's; in Canada also RONA. Lowe's lists Litokol Starlike epoxy grout; The Home Depot lists QEP glass tile nippers.
  • Tile: Floor & Decor (glass mosaic, Goldblatt nippers).
  • Art and craft: Michaels (stained glass, glass mosaic pieces), Blick; DeSerres in Canada.
  • Online: Amazon.com, Amazon.ca, eBay.

Gulf states and the UAE

  • Home improvement: ACE in the UAE (tile adhesive, clear construction adhesive). Mapei and Laticrete both have regional sites and distributors.
  • Tile: tile showrooms in the main cities carry glass and stone mosaic.
  • Online: Amazon.ae, noon (UAE, Saudi Arabia, Egypt).
  • Smalti is usually ordered from a supplier abroad; check customs rules first.

Asia

  • Japan: Amazon.co.jp, Rakuten.
  • Southeast Asia: Shopee and Lazada (Singapore, Malaysia, Indonesia, Thailand, Vietnam, the Philippines).
  • India: Amazon.in, Flipkart.
  • China: Chinese smalti and glass tile are cheaper and widely sold online; AliExpress ships worldwide.
  • Mapei has local sites for Hong Kong, Malaysia, South Korea and India that list its Isolastic latex additive.

Australia and New Zealand

  • Home improvement: Bunnings and Mitre 10 (both countries): tile nippers, adhesive, grout.
  • Tile: Beaumont Tiles (Australia).
  • Online: Amazon.com.au, eBay, Trade Me (New Zealand).

Latin America

  • Home improvement: Sodimac (Chile, Colombia, Peru and other countries), The Home Depot México, Leroy Merlin Brasil.
  • Online: Mercado Libre (Mexico, Brazil, Argentina, Chile, Colombia, Peru and more), Amazon.com.mx, Amazon.com.br.
  • Smalti and pre-cut stone are usually ordered from a supplier abroad.

Buying across borders

  • Order early. International parcels take from a couple of weeks to a month.
  • Ask about weight and customs before you pay. Glass and adhesive are heavy, and some countries have strict import rules for smalti, glass tile and adhesive.
  • One batch per color, with extra for waste. A second order rarely matches exactly.
  • Buy adhesive and grout locally. They are heavy and sold almost everywhere.

Safety

Safety

Glass and stone. Wear safety glasses when you cut; chips fly. Cut over a deep tray, sweep up with a brush, and never blow chips off the table. Keep children and pets away from the cutting area.

Dust. Cement-based adhesive, grout and stone dust contain crystalline silica. Mix powders gently, wear an FFP2 or N95 dust mask, and wet-wipe the table instead of dry sweeping. If you trim edges with an angle grinder, wear a mask and glasses and work outdoors if you can.

Cement. Wet cement is alkaline and irritates skin and eyes. Wear gloves and wash splashes off at once.

Epoxy and solvent adhesives. Wear nitrile gloves, ventilate the room, and follow the label. Some clear construction adhesives, including the one in the videos, are solvent-based and flammable: keep them away from flames.

Brands you see in the videos

The lessons were filmed in Russia, so some products on screen are Russian or sold mainly there: Diamant epoxy grout, for example. Our own smalti and stone are sold in Russia and the CIS only. Match each item by specification, not by brand: pre-cut smalti of the size in your course list, a two-part translucent epoxy grout, a polymer-modified white or gray tile adhesive. The lesson lists give the specifications.

Questions about a material you can't find? Write to us at the contact page.

Questions, answered

Can I buy the materials shown in the course videos from you?

Not outside Russia and the CIS. Our studio makes and sells materials there only, and we don't ship abroad. Everything in the lessons has an equivalent you can buy where you live: this guide explains what to look for.

Do I need the exact brands used in the lessons?

No. The lessons were filmed in Russia, so some products on screen are Russian or sold mainly there. Match the specification (material, size, thickness, type of adhesive or grout), not the label. Any tool that does the same job works.

What if I can't find pre-cut smalti or stone?

Buy smalti plates, or stone in strips or as 2 × 2 cm (3/4 × 3/4 in) mosaic tile, and cut it yourself with a hammer and hardie or with nippers. It takes longer, but the result is the same. See how to cut smalti.

Can I use PVA glue instead of tile adhesive?

Only for small, light indoor pieces on wood. None of our courses uses PVA for setting or mounting: the stone and smalti panels need cement-based adhesive with a latex additive or epoxy, and mounting steps need a water-resistant adhesive. More in the best glue for mosaics.

Is it cheaper to order from a mosaic supplier abroad?

Sometimes, but glass, stone and adhesive are heavy. Before you pay, ask the supplier for the shipping cost and the customs paperwork for your country, and allow two weeks to a month for delivery.